...
Setup and install your GL.iNET router and download the Uplink Package containing 3 ipkg ipk files:
libwebsockets-openssl_4.3.2-3_mipsel_24kc.ipk
...
Add GL.iNET router as Uplink Camera to VMS Platform using GL.iNET server’s serial number and MAC Address.
Upgrade GL.iNET router to the latest available firmware.
Navigate to http://GLiNET-IP/#/luci and make sure to install Luci.
Once Luci is installed, navigate to the software page of the Luci interface.
http://GLiNET-IP/cgi-bin/luci/admin/system/opkgUpload and install libwebsockets-openssl_4.3.2-3_mipsel_24kc.ipk package supplied in the uplink package.
Upload and install cameraagent_1.0-1_mipsel_24kc.ipk
Upload and install luci-app-cameraagent_1.0-1_all.ipk
Re-login to the Luci interface.
Navigate to the Uplink plugin interface: http://GLiNET-IP/cgi-bin/luci/admin/services/cameraagent
Add Uplink Cameras on your Cloud VMS platform for each camera you are going to connect through the GL.iNET bridge.
After adding each camera to Cloud VMS, add the same camera information into the Camera Form of the Uplink Plugin’s interface. Make sure to enable each camera you want to add.
Then scroll down to the bottom of the page and click Save & Apply.
Then navigate to http://GLINET-IP/cgi-bin/luci/admin/services/cameraagent/control and click ‘Start Camera Agent’ to begin start the application.
