Page Comparison

...

1. Connect GL.iNET router to power using the provided Micro USB cable.

2. Connect the Ethernet cable from your internet router to the WAN port on the GL.iNET router.

3. Connect your local computer to the GL.iNET router either

   1. by WiFi using GL.iNET access point “GL-MT300N-…”, or

   2. by Ethernet using the LAN port on GL.iNET router.

4. Navigate to the admin page located at the address 192.168.8.1.

5. Choose your preferred language.
   

   

6. Set password.
   

   Navigate to Network > Network Mode and set the router to Access Point modeand click apply.
   Image Removed

...

1. Verify the firmware version that the GL.iNET device has installed by navigating to http://192.168.8.1/#/upgrade.
   The version that should be installed is 4.3.7.
   You can upgrade your device to version 4.3.7 by downloading the firmware from GL.iNET’s firmware directory and performing a local upgrade.
   

   Image Added

2. Navigate to Network > Network Mode and set the router to Access Point modeand click apply.
   

...

1. Image Added

2. You are now be able to access the router from within your network and no longer need to connect to it directly.

3. Verify that the device has internet access by using the device’s network diagnostics
   http://GLINET-IP/cgi-bin/luci/admin/network/diagnostics

...

Gateway Installation

Download the Gateway Package for GL.iNET.

To determine which version your device requires, navigate to https://<GLINET-IP>/cgi-bin/luci/ and look at the firmware version.

...

.

...

1. Navigate to the software page of the Luci interface.
   http://GLiNET-IP/cgi-bin/luci/admin/system/opkg

2. You may need to update the package list by clicking “Update lists”. Search for and install the package libwebsockets-openssl in the available packages section and click “Install”.

   

3. Upload and install the cameraagent_<version>_mipsel_24kc.ipk package from the downloaded GLiNET package.

4. Upload and install the luci-app-cameraagent_<version>_all.ipk package from the downloaded GLiNET package.

5. Re-login to the Luci interface.

OpenWrt 19.07.8

1. If Luci is not installed, navigate to http://GLiNET-IP/#/luci and install Luci.

2. Navigate to the software page of the Luci interface.
   http:// GLiNET -IP/cgi-bin/luci/admin/system/opkgUpload and install libwebsockets-openssl_4.3.2-3_mipsel_24kc.ipk package supplied in the GLiNET package.

3. Upload and install cameraagent_1.0-1_mipsel_24kc.ipk

4. Upload and install luci-app-cameraagent_1.0-1_all.ipk

5. Re-login to the Luci interface.

...