...
Router Setup with GoodCloud
Setup Device
Plug in the power cable.
Connect GLiNET to the network using the WAN port.
Connect a local device (laptop or desktop) to the GLiNET using one of the two methods:
Ethernet into the LAN port.
WiFi using GL.iNET access point “GL-MT300N-…”
Connect to router @ http://192.168.8.1 in a browser.
Follow the instructions in the browser.
a. Choose your preferred language.
b. Set password.
Connect GLiNET to network using WAN port.
Setup Goodcloud
Navigate to APPLICATIONS > GoodCloud in on the GLiNET Web page.
Enable GoodCloud, Enable Remote Web Access, Set data server. Then agree to the Terms of Service and click Apply.
Copy and send Device info from this page to the VXG team.
Device ID
Device MAC
Device S/N
Basic Router Setup
Connect GL.iNET router to power using the provided Micro USB cable.
Connect the Ethernet cable from your internet router to the WAN port on the GL.iNET router.
Connect your local computer to the GL.iNET router either
by WiFi using GL.iNET access point “GL-MT300N-…”, or
by Ethernet using the LAN port on GL.iNET router.
Navigate to the admin page located at the address 192.168.8.1.
Choose your preferred language.
Set password.
Verify the firmware version that the GL.iNET device has installed by navigating to http://192.168.8.1/#/upgrade.
The version that should be installed is 4.3.7.
You can upgrade your device to version 4.3.7 by downloading the firmware from GL.iNET’s firmware directory and performing a local upgrade.
Navigate to Network > Network Mode and set the router to Access Point modeand click apply.
You should be able to access the router from within your network and no longer need to connect to it directly.
Verify that the device has internet access by using the device’s network diagnostics
http://GLINET-IP/cgi-bin/luci/admin/network/diagnostics
...