Versions Compared

Old Version 21

changes.mady.by.user Jared Taylor

Saved on

compared with

New Version 22

changes.mady.by.user Jared Taylor

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Connect GL.iNET router to power using the provided Micro USB cable.

  2. Connect the Ethernet cable from your internet router to the WAN port on the GL.iNET router.

  3. Connect your local computer to the GL.iNET router either

    1. by WiFi using GL.iNET access point “GL-MT300N-…”, or

    2. by Ethernet using the LAN port on GL.iNET router.

  4. Navigate to the admin page located at the address 192.168.8.1.

  5. Choose your preferred language.

  6. Set password.

  7. Verify the firmware version that the GL.iNET device has installed by navigating to http://192.168.8.1/#/upgrade.
    The version that should be installed is 4.3.711.
    You can upgrade your device to version 4.3.7 11 by downloading the firmware from GL.iNET’s firmware directory and performing a local upgrade.

  8. Navigate to Network > Network Mode and set the router to Access Point modeand click apply.

  9. You should be able to access the router from within your network and no longer need to connect to it directly.

  10. Verify that the device has internet access by using the device’s network diagnostics
    http://GLINET-IP/cgi-bin/luci/admin/network/diagnostics

...