When you have just connected a new camera to your router, you need to open its web interface - just type in the local IP address of your new camera in a web browser - you can find this local IP address (usually in format 192.168.x.x) in your router among other connected devices:
When you have opened the camera’s web interface, you need to activate it first by setting up a password:
2. Then login to the camera's web interface using the password and navigate to Configuration > Network > General settings. On this page you need to enable UPnP port forwarding:
3. Then go to your account on VXG Dashboard and add a new camera: Video management > Add new camera > IP camera. Set the stream parameters - you should only enter your camera name, external IP address, and password, all other parameters should be entered as you see them on the screenshot:
Was tested with the following camera models: IB9360-H, FD9388-HTV