/
Adding Cameras to Gateway
Adding Cameras to Gateway
Make sure that the Gateway is connected and online. You should be able to access the Web UI through Cloud One.
Click on the Gateway in the Gateways list and then select Add Camera to Gateway in the top right corner of the page.
Fill out the camera form with the camera’s information, including:
local IP of camera that should be accessible in the same network as the router
http port (usually 80)
rtsp port (usually 554)
username
password
Click Add Camera and the camera should appear online if all the information is correctly set.
, multiple selections available,
Related content
Adding Mikrotik Router to Cloud One
Adding Mikrotik Router to Cloud One
More like this
Installation on Mikrotik Router
Installation on Mikrotik Router
Read with this
Connecting IP cameras via Uplink
Connecting IP cameras via Uplink
More like this
Connecting Cameras To Cloud NVR
Connecting Cameras To Cloud NVR
More like this
Camera Connectivity & Onboarding Guide
Camera Connectivity & Onboarding Guide
More like this
Using Gateway
Using Gateway
More like this