When you have connected a new camera to your router, you need to open its web interface - just type in the local IP address of your new camera in a web browser - you can find this local IP address (usually in format 192.168.x.x) in your router among other connected devices.
When you have just opened the camera’s web interface, you need to activate it first by setting up a password:
Then login to the camera's web interface using the password and navigate to Configuration > Network > Basic settings > NAT. On this page you need to enable UPnP port forwarding:
The camera will forward standard HTTP and RTSP ports. As these ports may be used by other services, we recommend to set up them manually, like this:
Then you should navigate to Advanced settings > Configuration protocol. You will need to enable ONVIF:
and create an ONVIF user by clicking “Add”:
Then go to your account on VXG Dashboard and add a new camera: Video management > Add new camera > IP camera. Set the stream parameters - your public IP address, HTTP & RTSP ports that you have selected on step 4, ONVIF username and password from step 5:
General
Content
Integrations