Page Comparison

1. Download the Hanhwa Uplink Application for you your Hanwha camera’s platform.
   S3L: https://dashboard.videoexpertsgroup.com/downloads/uplink/./apps/Hanwha/s3l/1.0.2/VXGUplinkApp.capWN5: https://dashboard.videoexpertsgroup.com/downloads/uplink/apps/Hanwha/wn5/1.0.2/VXGUplinkApp.cap

2. Go to your VMS ' web UI and add an a Uplink Camera.
   

   

   Make sure to check the Use Provisioning Server box and input the Serial Number and MAC Address of the camera.
   Use colons in the MAC Address (As as seen in photothe screenshot)

3. Open the web interface for your Hanwha camera and navigate to the Open Platform page.

4. Upload and install the .cap application file.

5. Once the application is installed, click on the Go App button to access the application’s web page.
   

   

    

6. Click Start Application.

7. Once the application has started enter the camera’s username and password then click Save.

8. After the application stops, return to the camera’s Open Platform page and then click the Start button on the VXGUplinkApp.
   

   

    

...