Versions Compared

Old Version 22

changes.mady.by.user Jared Taylor

Saved on

compared with

New Version Current

changes.mady.by.user Jared Taylor

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Table of Contents
minLevel1
maxLevel6
outlinefalse
stylenone
typelist
printabletrue

Router Setup

...

Setup Device

  1. Plug in the power cable.

  2. Connect GLiNET to the network using the WAN port.

  3. Connect a local device (laptop or desktop) to the GLiNET using one of the two methods:

    1. Ethernet into the LAN port.

    2. WiFi using GL.iNET access point “GL-MT300N-…”

  4. Connect to router @ http://192.168.8.1 in a browser.

  5. Follow the instructions in the browser.
    a. Choose your preferred language.

    b. Set password.

Setup Goodcloud

  1. Navigate to APPLICATIONS > GoodCloud on the GLiNET Web page.

    image-20240502-190605.pngImage Removed

  2. Enable GoodCloud, Enable Remote SSH, Enable Remote Web Access, Set data server.
    Then agree to the Terms of Service and click Apply.

    image-20240503-143219.pngImage Removed

  3. Copy and send Device info from this page to the VXG team.

    image-20240502-191037.pngImage Removed

    • Device ID

    • Device MAC

    • Device S/N

Basic Router Setup

  1. Connect GL.iNET router to power using the provided Micro USB cable.

  2. Connect the Ethernet cable from your internet router to the WAN port on the GL.iNET router.

  3. Connect your local computer to the GL.iNET router either

    1. by WiFi using GL.iNET access point “GL-MT300N-…”, or

    2. by Ethernet using the LAN port on GL.iNET router.

  4. Navigate to the admin page located at the address 192.168.8.1.

  5. Choose your preferred language.

    Image Removed

  6. Set password.

    Image Removed

  7. Verify the firmware version that the GL.iNET device has installed by navigating to http://192.168.8.1/#/upgrade.
    The version that should be installed is 4.3.11.
    You can upgrade your device to version 4.3.11 by downloading the firmware from GL.iNET’s firmware directory and performing a local upgrade.

  8. Navigate to Network > Network Mode and set the router to Access Point modeand click apply.

  9. You should be able to access the router from within your network and no longer need to connect to it directly.

  10. Verify that the device has internet access by using the device’s network diagnostics
    http://GLINET-IP/cgi-bin/luci/admin/network/diagnostics

Goodcloud Setup

  1. Navigate to APPLICATIONS > GoodCloud on the GLiNET Web page.

    image-20240502-190605.pngImage Added

  2. Enable GoodCloud, Enable Remote SSH, Enable Remote Web Access, Set data server.
    Then agree to the Terms of Service and click Apply.

    image-20240503-143219.pngImage Added

  3. Copy and send Device info from this page to the VXG team.

    image-20240502-191037.pngImage Added

    • Device ID

    • Device MAC

    • Device S/N

Gateway Installation

Download the Gateway Package for GL.iNET.

Installation Script

  1. Log into glinet through SSH.

    Code Block
    ssh root@<GLINET_IP>

    If GoodCloud is enabled, the device’s terminal can be accessed through the portal.

    image-20241024-154114.pngImage Added

  2. Download latest uplink package onto device

    Code Block
    wget https://dashboard.videoexpertsgroup.com/downloads/uplink-gateway/GLiNET-package-<VERSION>.zip

  3. Extract the zip file

    Code Block
    unzip GLiNET-package-<VERSION>.zip

  4. Run install script

    Code Block
    cd GLiNET-package-<VERSION>/package && ./install.sh

Installation Through Luci Web UI

  1. Navigate to the software page of the Luci interface.
    http://GLiNET-IP/cgi-bin/luci/admin/system/opkg

  2. Make sure to update your package list before installing the Uplink Packages.

    Screenshot from 2024-02-05 09-57-30.png

  3. Upload and install the uplink-gateway_<VERSION>_mipsel_24kc.ipk package from the downloaded GLiNET package.

    Screenshot from 2024-02-05 09-57-18.pngScreenshot from 2024-02-05 09-57-49.pngScreenshot from 2024-02-05 09-58-05.png

  4. Upload and install the luci-app-uplink-gateway_<VERSION>_all.ipk package from the downloaded GLiNET package.

  5. Re-login to the Luci interface.

Adding Gateway to Cloud VMS

  1. Add GL.iNET router as Uplink Camera to VMS Platform using GL.iNET server’s serial number and MAC Address.

...

The serial number and MAC address can be found on the back of the GL.iNET router

...

Adding Cameras:

  1. Add Uplink Cameras to your Cloud VMS platform for each camera you are going to connect through the GL.iNET bridge. You’ll need the following information for each camera:

    1. Camera username.

    2. Camera password.

    3. Camera serial number (should be printed on a camera)

    4. Camera MAC address (should be printed on a camera)

...

  1. Navigate to the Gateways page on Cloud One and click Add Gateway in the top right corner.

  2. Select the OpenWRT Gateway checkbox on the Gateway form and fill out the form with the device’s information.

    image-20240701-140150.pngImage Added


    You can find the Device’s Serial Number and MAC Address on the page http://<ROUTER-IP>//cgi-bin/luci/admin/services/uplink-gateway/settings or on the back of the device.

    image-20240628-161535.pngImage AddedImage Added

  3. After adding the GL.iNET Uplink Gateway to Cloud One the gateway should appear online within a couple of minutes.

Once the Gateway is connected you can proceed with Adding Cameras to Gateway

Upgrading Uplink Gateway

  1. Download the latest version from our Dashboard.

  2. Navigate to the software page on your GL.iNET device.
    <DEVICE_IP>/cgi-bin/luci/admin/system/opkg

  3. Update package lists.

    Screenshot from 2024-02-05 09-57-30.pngImage Added

  4. Upload the new version up Uplink Gateway.
    After a successful upgrade the Executing Package Manager dialog box should display:
    Upgrading uplink-gateway on root from 1.0-4 to 1.0-5...

  5. The package should now be successfully upgraded.

Troubleshooting

Checking Logs

A key aspect of knowing the cause of an issue is being able to see what is occurring on the device.
The device logs can be accessed at http://<GLiNET-IP>/cgi-bin/luci/admin/

...

After adding each camera to Cloud VMS, add the same camera serial number and MAC address into the Camera Form of the plugin’s interface, plus the local IP address of the camera. Make sure to enable each camera you want to add.

...

Then scroll down to the bottom of the page and click Save & Apply.
Note. Default ports for IP Cameras are usually http: 80, rtsp: 554

...

status/logs.

Rebooting Gateway Services

All Uplink services can be restarted by navigating to http://<GLiNET-IP>/cgi-bin/luci/admin/services/

...

uplink-gateway/

...

settings and clicking ‘Restart Gateway’

...