Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Pre-Instructions:

Download the package for GL.iNET from here that contains 3 ipk files:

libwebsockets-openssl_4.3.2-3_mipsel_24kc.ipk

cameraagent_1.0-1_mipsel_24kc.ipk

luci-app-cameraagent_1.0-1_all.ipk

Instructions:

  1. Add GL.iNET router as Uplink Camera to VMS Platform using GL.iNET server’s serial number and MAC Address.

  2. Upgrade GL.iNET router to the latest available firmware.

  3. Navigate to http://GLiNET-IP/#/luci and make sure to install Luci.

  4. Once Luci is installed, navigate to the software page of the Luci interface.
    http://GLiNET-IP/cgi-bin/luci/admin/system/opkg

  5. Upload and install libwebsockets-openssl_4.3.2-3_mipsel_24kc.ipk package supplied in the uplink package.

  6. Upload and install cameraagent_1.0-1_mipsel_24kc.ipk

  7. Upload and install luci-app-cameraagent_1.0-1_all.ipk

  8. Re-login to the Luci interface.

  9. Navigate to the Uplink plugin interface: http://GLiNET-IP/cgi-bin/luci/admin/services/cameraagent

  10. Add Uplink Cameras on your Cloud VMS platform for each camera you are going to connect through the GL.iNET bridge.

  11. After adding each camera to Cloud VMS, add the same camera information into the Camera Form of the Uplink Plugin’s interface. Make sure to enable each camera you want to add.

    Then scroll down to the bottom of the page and click Save & Apply.

  12. Then navigate to http://GLINET-IP/cgi-bin/luci/admin/services/cameraagent/control and click ‘Start Camera Agent’ to start the application.

  • No labels