Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Next »

Setup

  1. Download the Hanhwa Uplink Application for your Hanwha camera’s platform.
    https://dashboard.videoexpertsgroup.com/downloads/uplink/

  2. Go to your VMS web UI and add a Uplink Camera.

    Make sure to check the Use Provisioning Server box and input the Serial Number and MAC Address of the camera.
    Use colons in the MAC Address (as seen in the screenshot)

  3. Open the web interface for your Hanwha camera and navigate to the Open Platform page.

  4. Upload and install the .cap application file.

  5. Once the application is installed, click on the Go App button to access the application’s web page.

     

  6. Click Start Application.

  7. Once the application has started enter the camera’s username and password then click Save.

  8. After the application stops, return to the camera’s Open Platform page and then click the Start button on the VXGUplinkApp.

     

  9. Enable auto start and set High priority and click Apply.

Note that it is suggested to check that the camera’s default and record video profiles are set to valid video streams.

Now the application should be running and you can check the camera on your VMS Platform.

Troubleshooting

Known error codes and possible causes

Errors

Possible causes and resolutions

1

APP UPLOAD FAIL

the package file name is wrong, it should be changed after downloading

2

INVALID APPLICATION PACKAGE

the package file is for a wrong Hanwha platform, try with a file for a different platform (WN5, S3L, etc.)

3

“You have exceeded the maximum number of login attempts”

The username and password are wrong. Try to connect in a minute and change them on “Go App” page

In case of any technical problems, please download the camera logs and send them to VXG technical support.

  • No labels